Member Login   |   Register        
     
 
 
   
     
       
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AquaDose Dosing System

Product Description

The control of pH is essential in many different type of aquatic systems. The most common use of pH control is to counteract the acidity produced by the process of nitrification in recirculation systems. Without pH control in such systems, the pH would rapidly fall to a level that is toxic to the animals, as well as the bacteria in the biological filter (Aquatext Dictionary: pH Control). In order to raise the pH and maintain it at an optimal level, the AquaDose System can be programmed to dose sodium bicarbonate into the system as needed.

Conductivity is the ability to conduct electricity, i.e. the measure of salinity and minerals in the water. Because variations in salinity can cause stress and mortality in aquatic animals, it is important to maintain a stable level in the system water, especially when a system is supplied with reverse osmosis water.

Product Information

The AquaDose System includes pH and conductivity transmitters, pH and conductivity probes, dosing pumps, and dosing tanks. On a Stand Alone System, the AquaDose is mounted onto the rack; on a Central Filtration System, it rests on a stainless steel stand.
  • The pH and conductivity (salinity) transmitters monitor the levels of pH and conductivity in an aquatic system via the two probes. As soon as the unit recognizes a divergence from the pre-programmed pH or conductivity levels, it will automatically pump the necessary chemicals into the aquatic system in order to maintain these levels.
  • The dosing pumps are electronic metering pumps that administer a metered amount of control solution as directed by the transmitters.
Central Filtration Dosing System  
DAD15
Chem Feed Dosing Barrels and Pumps
  DD03
Rack Mounted Chem Feed Dosing and Control
Dolphin dosing pump   Dosing probes
MCCFD10
Chem Feed/Dosing Pump
  (clockwise) pH probe; conductivity probe

AquaDose Dosing Systems

Part Number Description
  Dosing and Control    
  DD03 Chem Feed Dosing & Control for pH and Conductivity with Controllers, Pumps, (2) 3 Gallon Tanks. Rack or Storage Tank Mounted.(up to 4 racks)  
  DD05 Chem Feed Dosing & Control for pH and Conductivity with Controllers, Pumps, (2) 5 Gallon Barrels and Stainless Steel Stand.(3-8 racks)  
  DD15 Chem Feed Dosing & Control for pH and Conductivity with Controllers, Pumps, (2) 15 Gallon Barrels and Stainless Steel Stand.(12-24 racks)  
  DD30 Chem Feed Dosing & Control for pH and Conductivity with Controllers, Pumps, (2) 30 Gallon Barrels and Stainless Steel Stand.(25-50 racks)  
       
  Stacked Dosing and Control    
  DDS05 Chem Feed Dosing & Control for pH and Conductivity with Controllers, Pumps, (2) 5 Gallon Stacked Barrels and Stainless Steel Stand.(3-8 racks)  
  DDS15 Chem Feed Dosing & Control for pH and Conductivity with Controllers, Pumps, (2) 15 Gallon Stacked Barrels and Stainless Steel Stand.(12-24 racks)  
       
  Barrels and Pumps    
  DAD03 Chem Feed Dosing Tanks & Pumps for pH and Conductivity with (2) 3 Gallon Tanks (Requires Controllers)  
  DAD05 Chem Feed Dosing Barrels & Pumps for pH and Conductivity with (2) 5 Gallon Barrels (Requires Controllers)  
  DAD15 Chem Feed Dosing Barrels & Pumps for pH and Conductivity with (2) 15 Gallon Barrels (Requires Controllers)  
  DAD30 Chem Feed Dosing Barrels & Pumps for pH and Conductivity with (2) 30 Gallon Barrels (Requires Controllers)  
       
  Barrels and Pumps    
  DAS05 Chem Feed Dosing Barrel & Pump for pH and Conductivity with (1) 5 Gallon Barrel (Requires Controllers)  
  DAS15 Chem Feed Dosing Barrel & Pump for pH and Conductivity with (1) 15 Gallon Barrel (Requires Controllers)  
  DAS30 Chem Feed Dosing Barrel & Pump for pH and Conductivity with (1) 30 Gallon Barrel (Requires Controllers)  
       
  Stacked Barrels and Pumps    
  DADS05 Chem Feed Dosing Stacked Barrels & Pumps for pH and Conductivity with (2) 5 Gallon Barrels (Requires Controllers)  
  DADS15
Chem Feed Dosing Stacked Barrels & Pumps for pH and Conductivity with (2) 15 Gallon Barrels (Requires Controllers)  
  DADS30
Chem Feed Dosing Stacked Barrels & Pumps for pH and Conductivity with (2) 30 Gallon Barrels (Requires Controllers)  
       
  Controllers
 
  MCGFpHC
pH and Conductivity Controllers - Measures pH and Salinity (To dose pH and salinity, requires barrels and pumps)  

 

 

 

 

 

  connection failed Access denied for user 'aquaneer'@'localhost' (using password: YES)